ICSI Training in India: What Real Hands-on Practice Includes

Planning ICSI training? The 8 skills a hands-on ICSI course must cover, how much bench time you need, and the red flags to avoid.

The Fertilis Academy21 Nov 2026 · 3 min read

Intracytoplasmic sperm injection (ICSI) is now one of the most routinely performed procedures in an IVF lab, and one of the hardest to learn from a screen. Good ICSI training is measured in hours at a micromanipulator, not in slides watched.

This guide covers the skills a serious hands-on ICSI course must teach, how to judge the bench time you are offered, the red flags that give away a lecture course, and the mistakes trainees make most often.

Why ICSI cannot be learned online

ICSI is a motor skill performed at high magnification, with both hands controlling joysticks and microinjectors at once. Small errors in pipette angle, suction or injection depth damage the oocyte. Videos teach you what good ICSI looks like. Only repeated, supervised practice teaches your hands to do it.

ICSI training: the 8 skills a hands-on course must cover

  1. Setting up the ICSI station: heated stage, optics and micromanipulator controls.

  2. Pipette alignment: holding and injection pipettes level and in the same focal plane.

  3. Dish preparation: droplets for oocytes and sperm under oil, without bubbles or contamination.

  4. Denudation: removing cumulus cells with hyaluronidase and stripping pipettes, then judging oocyte maturity.

  5. Sperm selection and immobilisation: choosing a morphologically normal, motile sperm and immobilising it.

  6. Holding the oocyte: gentle suction with the polar body positioned at 6 or 12 o'clock to protect the spindle.

  7. Injection: penetrating the zona, confirming oolemma breakage and delivering one sperm with minimal cytoplasm disturbance.

  8. Post-ICSI handling and fertilisation check: returning oocytes to culture and assessing pronuclei at 16–18 hours.

A course that skips any of these is teaching part of the procedure.

How much bench time is enough?

There is no single magic number, but the pattern is clear: competence comes from many repetitions under feedback. When comparing ICSI courses, ask:

  • How many full days are spent at the micromanipulator?

  • How many trainees share each ICSI station?

  • Is a mentor beside you, or circulating between groups?

  • Will you practise on the same equipment used in clinical work?

A large batch sharing one station can leave each trainee with very little real practice time, however long the course runs.

Red flags: when a "hands-on" course is mostly lectures

  • The schedule lists topics, not bench hours per trainee

  • No maximum batch size is stated

  • "Demonstration" or "exposure" appears where you expected "practice"

  • Training happens in a classroom or simulation room, not a working IVF lab

  • No logbook records what you performed yourself

  • The trainer is not currently working in a clinical lab

Two or more of these together usually mean you will watch far more than you do.

Common mistakes trainees make

  • Applying too much suction with the holding pipette

  • Injecting before the oolemma has clearly broken

  • Injecting too much medium with the sperm

  • Working too slowly, so oocytes spend too long outside optimal conditions

  • Poor focus control, so the pipette and oocyte are not in the same plane

Each of these is fixed through immediate feedback at the bench, which is why small batches matter.

ICSI and vitrification: learn them together

Most labs expect embryologists to handle both ICSI and vitrification. Vitrification depends on precise timing through cryoprotectant solutions before plunging into liquid nitrogen at −196 °C. Training both in one programmed mirrors how the lab actually works.

Hands-on ICSI & Vitrification at The Fertilis Academy

The Fertilis Academy's Hands-on ICSI & Vitrification programme runs in the Department of Reproductive Medicine at Artemis Hospital, Gurugram.

  • 13 sessions of guided micromanipulator practice

  • A vitrification module across four parallel stations

  • Ongoing enrolment: start when it suits you

  • Fee: ₹1,05,000

  • Eligibility includes MBBS, MD, BDS, BAMS and BHMS graduates, MSc life-science graduates, embryologists, and B.Pharm or genetics professionals

Want a structured 10-day batch instead? The Embryology Hands-on Training gives five-plus days of ICSI inside a full andrology-to-vitrification programme, capped at 4 trainees.

Explore Hands-on ICSI & Vitrification →

Still choosing between a degree and short training? Read our guide to choosing an embryology course in India.

(01)FAQs

Frequently asked questions

1. What is ICSI training?

Practical training in intracytoplasmic sperm injection, where a single sperm is injected directly into a mature oocyte using a micromanipulator.

2. Who can join an ICSI training course?

Embryologists, medical graduates, life-science postgraduates and IVF lab staff. Check each course's eligibility list.

3. How long does it take to learn ICSI?

You can learn the steps in days. Becoming consistent takes sustained, supervised practice in a working lab.

4. Is there ICSI training in Delhi NCR?

Yes. The Fertilis Academy's hands-on ICSI programme runs at Artemis Hospital, Gurugram.

5. Does ICSI training include vitrification?

Not always. Confirm that vitrification is a separate, hands-on module before you enroll.